Samsung ML-2160, ML-2162, ML-2165, ML-2167, ML-2168 fix firmware [chipless / sin chip]
![Samsung ML-2160 ML-2162 ML-2165 ML-2167 ML-2168 fix firmware [chipless / sin chip]](https://orpys.com/img/cms/Printer/ML2165W.jpg)
| Model | Firmware version |
|---|---|
| ML-2160 ML-2162 ML-2165 ML-2167 ML-2168 |
V1.01.01.05 V1.01.01.08 V1.01.01.11 V1.01.01.12 V1.01.02.00 V1.01.02.01 V1.01.02.03 |
To create a fix firmware you need to send the data of your printer:
1. Exact printer model
2. Firmware version
3. Machine Serial Number
4. CRUM Number (Toner chip)
To check printer reports (in order not to make a mistake in the data) we recommend use the free program PRINTER REPORTS BY ORPYS
It has the ability to save reports, you can send this report to us
Instruction (Manual) for program firmware
1. Extract the archive
2. Connect printer to computer
3. Drag and drop file P_NU_XXXXXXXXXXXXXXXXX_ML2160_V1.00.01.xx.hd on usbprns2.exe
- Wait for the printer to done programming (1-2 minutes) and then it will reboot itself.
- After the firmware, you need remove toner chip (glue by tape)
4. Done, the firmware is finished.
P/S: After the firmware, we recommend disconnecting the CRUM connector from the mainboard
Instruction (Manual) for program original firmware
1. Enter printer into Download Mode
2. Download and extract the archive with original firmware
3. Drag and drop file ML2160_V1.00.01.xx.hd on usbprns2.exe
Original firmware You can download in this Page
Enter Download Mode [forced mode]
Enter Download Mode [forced mode]
- With the printer turned OFF, press and hold the [PrintScreen] button then [Power],
- After a few seconds release both buttons [PrintScreen] and [Power]
