HP Laser 107a, 107r, 107w fix firmware (chipless / sin chip)

.

Order

To create a fix firmware you need to send the data of your printer:
1. Exact printer model
2. Firmware version
3. Machine Serial Number
4. CRUM Number (Toner chip)

To check printer reports (in order not to make a mistake in the data) we recommend use the free program  PRINTER REPORTS BY ORPYS
It has the ability to save reports, you can send this report to us

Instruction (Manual) for program firmware

1. Extract the archive
2. Connect printer to computer and enter printer into Download Mode (forced mode)
    -With the printer turned off, press and hold the [Cancel] button then [Power],
    -after a few seconds release both buttons [Cancel] and [Power]
3. Run download_1.bat or drag and drop file FIX_NU_XXXXXXXXXX_107x_V3.82.01.xx.hd on usbprns2.exe
    - Wait for the printer to done programming (1-2 minutes) and then it will reboot itself.
    - After the firmware, you need turn OFF the printer by button, after ON
4. Done, the firmware is finished.

Instruction (Manual) for program original firmware

1. Enter printer into Download Mode
2. Download and extract the archive with original firmware
3. Drag and drop file HP_107x_V3.82.01.xx.hd on usbprns2.exe

Original firmware You can download in this Page

Enter Download Mode [forced mode]

    -With the printer turned off, press and hold the [Cancel] button then [Power],
    -After a few seconds release both buttons [Cancel] and [Power]