Samsung Xpress SL-C480, SL-C480W, SL-C480FN, SL-C480FW, SL-C482, SL-C482W, SL-C482FW, SL-C483, SL-C483W, SL-C483FW fix firmware (chipless)

.

Order

To create a fix firmware you need to send the data of your printer:

1. Exact printer model
2. Firmware version
3. Machine Serial Number
4. CRUM Number of Black Toner chip

To check printer reports (in order not to make a mistake in the data) we recommend use the free program Printer Reports by ORPYS
it has the ability to save reports, you can send this report to us

Instruction (Manual) for program firmware №2 [Online Firmware]

1. Connect printer to computer and turn ON
    - Wait until it is ready and Windows finish find driver
2. Run link Online Firmware
    - Wait for the printer to done programming (2 minutes) and then it will reboot itself.
    - After the firmware, you need to glue tape of toner chip and not allow other chips
3. Done, the firmware is finished.
Pls never don't install cartridges with any chips  (Black chip need save for recovery firmware)

More info about Online Firmware on this page

Now available only Online Firmware

Firmware by file in processing [In Future]

Instruction (Manual) for program firmware №2 [in Normal mode]

1. Connect printer to computer and turn ON
    - Wait until it is ready and Windows finish find driver
2. Extract the archive with firmware and drag and drop file FIX_NU_XXXXXXXXXXXXXXX_SL-C480_V3.00.01.xx.hd on usbprns2.exe
    - Wait for the printer to done programming (2 minutes) and then it will reboot itself.
3. Done, the firmware is finished.

Instruction (Manual) for program firmware №3 [in Download mode]

1. Connect printer to computer and enter the printer to Download Mode
    - On the OFF the printer press button [Stop] after [Power] ,
    - Then printer will be show [Press Stop to download mode] need quickly unpress all buttons and second press button [Stop]
    - After the printer will be show [Wait Image]
2. Extract the archive with firmware and drag and drop file FIX_NU_XXXXXXXXXXXXXXX_SL-C480_V3.00.01.xx.hd on usbprns2.exe
    - Wait for the printer to done programming (2 minutes) and then it will reboot itself.
3. Done, the firmware is finished.

Instruction (Manual) for program original firmware

1. Enter the printer to Download Mode
2. Download and extract the archive with original firmware
3. Drag and drop file C480_V3.00.01.xx.hd on usbprns2.exe

Original firmware you can download by this link

Enter to Download Mode

    - On the OFF the printer press button [Stop] after [Power] ,
    - Then printer will be show [Press Stop to download mode] need quickly unpress all buttons and second press button [Stop]
    - After the printer will be show [Wait Image]