Xerox B210 fix firmware [chipless]

.

Order

To create a fix firmware you need to send the data of your printer:

1. Exact printer model
2. Firmware version
3. Machine Serial Number
4. CRUM Number (Toner chip)

To check printer reports (in order not to make a mistake in the data) we recommend use the free program Printer Reports by ORPYS, it has the ability to save reports, you can send this report to us

Instruction (Manual) for program firmware

1. Connect printer to computer
2. Enter printer into Download Mode
    - Turn off the printer by the button [Power], open the front cover of the printer.
    - Press and hold buttons [Power] 
    - On the printer will light all LEDs 
    - Unpress the button.
3. Extract the archive with the firmware and run the file download_1.bat or drag and drop the file FIX_NU_XXXXXXXXXX_B210_V3.50.01.xx.hd on usbprns2.exe.
    - Wait for the printer to done programming (1-2 minutes) and then it will reboot itself.
    - After the firmware you need to glue tape of toner chip and not allow other chips.
4. Done, the firmware is finished.

P/S: After firmware, we recommend disconnecting the CRUM connector from the Mainboard

Instruction (Manual) for program original firmware

1. Enter printer into Download Mode
2. Download and extract the archive with original firmware
3. Drag and drop the file B210_V3.00.01.xx.hd on usbprns2.exe

Original firmware you can download in this page

Enter to Download Mode

    - Turn off the printer by the button [Power], open the front cover of the printer.
    - Press and hold button [Power] 
    - On the printer will light LED