Samsung Xpress SL-C485, SL-C485FW, SL-C486, SL-C486W, SL-C486FW fix firmware (chipless)

Samsung Xpress SL-C485, SL-C485FW, SL-C486, SL-C486W, SL-C486FW fix firmware (chipless)

ModelVersion firmware
C485
C485FW
C486
C486W
C486FW
V3.00.01.06
V3.00.01.07
V3.00.01.09
V3.00.01.11
V3.00.01.12
V3.00.01.13
V3.00.01.14
V3.00.01.15
V3.00.01.16
V3.00.01.18
V3.00.01.19
V3.00.01.20

.

To create a fix firmware you need to send the data of your printer:

1. Exact printer model
2. Firmware version
3. Machine Serial Number
4. CRUM Number of Black Toner chip

To check printer reports (in order not to make a mistake in the data) we recommend use the free program Printer Reports by ORPYS
it has the ability to save reports, you can send this report to us




Attention!!! firmware under development (not yet ready)

Instruction (Manual) for program firmware №2 [Online Firmware]

1. Connect printer to computer and turn ON
    - Wait until it is ready and Windows finish find driver
2. Run link Online Firmware
    - Wait for the printer to done programming (2 minutes) and then it will reboot itself.
    - After the firmware, you need to glue tape of toner chip and not allow other chips
3. Done, the firmware is finished.
Pls never don't install cartridges with any chips  (Black chip need save for recovery firmware)

More info about Online Firmware on this page




Instruction (Manual) for program original firmware

1. Enter the printer to Download Mode
2. Download and extract the archive with original firmware
3. Drag and drop file C485_V3.00.01.xx.hd on usbprns2.exe

Original firmware you can download by this link





Enter to Download Mode

    - On the OFF the printer press button [Stop] after [Power] ,
    - Then printer will be show [Press Stop to download mode] need quickly unpress all buttons and second press button [Stop]
    - After the printer will be show [Wait Image]




Enter to  Service Mode [for models with Fax]

    - On the ON the printer need very quickly press buttons [Menu] [#] [1] [9] [3] [4] 
    - In Service Mode - the language of Menu is only English




Enter to  Service Mode [for models without Fax]

    - On the ON the printer need very quickly press buttons [▲Menu] [▼Back] [◄] [►] [OK] [Stop] [Menu▲] 
    - In Service Mode - the language of Menu is only English


Categories

Top sellers

Specials

No specials at this time.