Xerox WorkCentre 3335 / 3345 fix firmware [chipless]

Xerox WorkCentre 3335 / 3345 fix firmware [chipless]

ModelVersion FirmwareSoftware Version

WC3335DNI
WC3345DNI

V2.50.01.0160.001.01.000
V2.50.02.0160.002.01.000
V2.50.03.0560.003.05.000
V2.50.04.0060.004.00.000
V2.50.04.1060.004.10.000
V2.50.05.0060.005.00.000
V2.50.06.0360.006.03.000

.

Order

To create a fix firmware you need to send the data of your printer:

1. Exact printer model
2. Firmware version
3. Machine Serial Number
4. CRUM Number (Toner chip)

To check printer reports (in order not to make a mistake in the data) we recommend use the free program Printer Reports by ORPYS, it has the ability to save reports, you can send this report to us







Instruction (Manual) for program firmware

1. Connect printer to computer
2. Enter printer into Download Mode
    - On the printer turned off, open the front cover of the printer.
    - Press and hold buttons [Power Saver] after [Power] 
    - Should appear on the printer display [FIRMWARE DOWNLOAD MODE]
    - Unpress the buttons.
3. Extract the archive with the firmware and run the file download_1.bat or drag and drop the file FIX_NU_XXXXXXXXXX_WC3345_V60.00x.xx.000.hd on usbprns2.exe.
    - Wait for the printer to done programming (1-2 minutes) and then it will reboot itself.
    - After the firmware, you need to glue tape 2 chips (toner and drum) and not allow other chips
6. Done, the firmware is finished.

P/S: After the firmware, we recommend disconnecting the CRUM connectors from the mainboard





Instruction (Manual) for program original firmware

1. Enter printer into Download Mode
2. Download and extract the archive with original firmware
3. Drag and drop the file WC3345_V2.50.0x.xx.hd on usbprns2.exe

Original firmware you can download in this page





Enter to Download Mode

    - On the printer turned off, open the front cover of the printer.
    - Press and hold buttons [Power Saver] after [Power] 
    - Should appear on the printer display [FIRMWARE DOWNLOAD MODE]