Xerox Phaser 3330 fix firmware [chipless]

Xerox Phaser 3330 fix firmware [chipless]

ModelVersion FirmwareSoftware Version

Phaser 3330DNI

V2.50.01.0161.001.01.000
V2.50.02.0161.002.01.000
V2.50.03.0061.003.00.000
V2.50.04.0461.004.04.000

.

Order

To create a fix firmware you need to send the data of your printer:

1. Exact printer model
2. Firmware version
3. Machine Serial Number
4. CRUM Number (Toner chip)

To check printer reports (in order not to make a mistake in the data) we recommend use the free program Printer Reports by ORPYS, it has the ability to save reports, you can send this report to us




Attention !! At the moment, we are programming only in Lviv in our service center

Instruction (Manual) for program firmware

1. Connect printer to computer
2. Enter printer into Download Mode
    - Turn off the printer by the button [Power], open the front cover of the printer.
    - Press and hold buttons [Power] 
    - Should appear on the printer display [Wait Image]
    - Unpress the button.
3. Extract the archive with the firmware and run the file download_1.bat or drag and drop the file FIX_NU_XXXXXXXXXX_Phaser3330_V60.00x.xx.000.hd on usbprns2.exe.
    - Wait for the printer to done programming (1-2 minutes) and then it will reboot itself.
4. Done, the firmware is finished.





Instruction (Manual) for program original firmware

1. Enter printer into Download Mode
2. Download and extract the archive with original firmware
3. Drag and drop the file Phaser_3330_V2.50.0x.xx.hd on usbprns2.exe

Original firmware you can download in this page





Enter to Download Mode

    - Turn off the printer by the button [Power], open the front cover of the printer.
    - Press and hold button [Power] 
    - Should appear on the printer display [Wait Image]


Categories

Top sellers

New products

Specials

No specials at this time.