> Pantum Printers> Pantum BM5100adn BM5100adw BM5100fdn BM5100fdw Firmware

Pantum BM5100adn BM5100adw BM5100fdn BM5100fdw Chipless firmware

Pantum BM5100adn BM5100adw BM5100fdn BM5100fdw Chipless firmware

ModelVersion firmware
BM5100adn
BM5100adw		2.A.0.1
2.A.2.1
3.A.0.1
3.A.0.2
3.A.0.6
3.A.0.8
3.A.1.8
3.A.2.3
BM5100fdn
BM5100fdw		3.A.0.2
3.A.0.3
3.A.1.0
3.A.1.2

.

Order

To create a chipless firmware you need to send the data of your printer: data ID printer

For get printer data ID we recommend using the free program Pantum_Chipless_V4.2.1 or Pantum_Info
This program have button Get data ID, this data ID code you can send to us





Instruction (Manual) for program firmware [ !!! new instruction]

1. Extract the archive with the firmware
2. Connect printer to computer via USB cable
4. Drag and drop file fix_XXXXXXXXXX_BM5100_v3Axx.acl on usbprns2.exe..
    - Need wait for the printer to programming (1-2 min) and itself reboot.
    - After rebooting the printer you need remove toner chip [glue by tape]
5. Done, the firmware is finished.





Instructions firmware  [ !!! old instruction]

  1. The software version must be 4.1.1 or higher

  2. Remove the side cover from the USB cable connection side.

  3. With the printer turned off, close (with tweezers) the BOOT2 [CN2] contacts and turn on the printer

    UtpDlUbb_Hs-NdITUVOzgMFU9YaJZ6F5v03YKv7H

  4. The printer will turn on in Bootloader Mode, this can be checked by clicking the [Get Printer ID] button in the program.
    bje3uXaKzX21PnFkcGexwUpJQpqw8HiiZR16T2JD

  5. Press button [Upgrade Firmware] and select BM5100_Patch_2.A.2.1.hd
    https://orpys.com/file/fw/Pantum/BM5100_Patch_2.A.2.1.hd 

    !!! file BM5100_Patch_2.A.2.1.hd = is only for models BM5100adn BM5100adw

  6. Press button [Upgrade Firmware] and select BM5100F_Patch_3.A.0.2.hd
    https://orpys.com/file/fw/Pantum/BM5100F_Patch_3.A.0.2.hd 

    !!! file BM5100F_Patch_3.A.0.2.hd = is only for models BM5100fdn BM5100fdw

  7. Wait 30 seconds until the green bar at the bottom of the program fills up. After that, turn off the printer (by holding the power button for 5 seconds, or by disconnecting it from the power supply) and turn on the printer again.

  8. Now the printer will enter to mode Bootloader itself

  9. After all this, you can send the chipless firmware by clicking [Upgrade Firmware] and select the firmware file Chipless_XXXXXXXXXX_BM5100.fwr. The firmware process can be quite long, more 5 minutes. 
    Note: While programming the printer, the software will show NOT RESPONDING, but it's actually running [programs the printer] and you have to wait for it to finish

  10. After successful completion, the bar at the bottom of the program will be completely green and printer will automatically itself restarting.





BM5100 Series

BM5100adn [BM5101ADN BM5102ADN, BM5103ADN, BM5104ADN, BM5105ADN, BM5106ADN, BM5107ADN, BM5108ADN, BM5109ADN,BM5110ADN, BM5111ADN, BM5112ADN, BM5113ADN, BM5114ADN,BM5115ADN, BM5116ADN, BM5117ADN, BM5118ADN, BM5119ADN]

BM5100adw [BM5101ADW, BM5102ADW, BM5103ADW, BM5104ADW, BM5105ADW, BM5106ADW, BM5107ADW, BM5108ADW, BM5109ADW, BM5110ADW, BM5111ADW, BM5112ADW, BM5113ADW, BM5114ADW, BM5115ADW, BM5116ADW, BM5117ADW, BM5118ADW, BM5119ADW]

BM5100fdn [BM5101FDW, BM5102FDW, BM5103FDW, BM5104FDW, BM5105FDW, BM5106FDW, BM5107FDW, BM5108FDW, BM5109FDW, BM5110FDW, BM5111FDW, BM5112FDW, BM5113FDW, BM5114FDW, BM5115FDW, BM5116FDW, BM5117FDW, BM5118FDW, BM5119FDW]

BM5100fdw [BM5100FDN, BM5101FDN, BM5102FDN, BM5103FDN, BM5104FDN, BM5105FDN, BM5106FDN, BM5107FDN, BM5108FDN, BM5109FDN, BM5110FDN, BM5111FDN, BM5112FDN, BM5113FDN, BM5114FDN, BM5115FDN, BM5116FDN, BM5117FDN, BM5118FDN, BM5119FDN]