> Pantum Printers> Pantum P3010 P3300 Firmware

Pantum P3010DN P3010DW P3300DN P3300DW Chipless firmware

Pantum P3010DN P3010DW P3300DN P3300DW Chipless firmware

ModelVersion firmware
P3010DN
P3010DW
P3300DN
P3300DW		 3.2.0.4
3.2.0.9
3.2.1.1
3.3.0.4
3.3.0.9
3.3.1.1
3.3.4.9
3.3.5.4
3.3.6.0
3.3.6.3
3.3.6.5
3.3.7.3
2.A.0.5
3.A.0.1
3.A.0.5
3.A.0.9
3.A.1.5
3.A.1.9
3.A.2.0
E.A.0.3

.

Order

To create a chipless firmware you need to send the data of your printer: data ID printer

For get printer data ID we recommend using the free program Pantum_Info or Pantum_Chipless
This program have button Get data ID, this data ID code you can send to us





Instruction (Manual) for program firmware [ !!! new instruction]

1. Extract the archive with the firmware
2. Connect printer to computer via USB cable
3. Drag and drop file fix_XXXXXXXXXX_P3300_V3xxx.acl on usbprns2.exe
    - Need wait for the printer to programming (1-2 min) and itself reboot.
    - After rebooting the printer you need remove toner chip [glue by tape]
4. Done, the firmware is finished.





Instruction (Manual) for program firmware  [ !!! old instruction]

1. Connect printer to computer via USB cable
2. Run the program Pantum_Chipless by ORPYS
3. In the upper right corner of the program, press the button [Upgrade Firmware]
    - And select file firmware Chipless_XXXXXXXXXX_P3300_3.x.x.x_NormalMode.fwr
    - Need wait for the printer to programming (1-2 min) and itself reboot.
4. Done, the firmware is finished.