Xerox WorkCentre 3025BI fix firmware (chipless)

ModelVersion firmware
W3025BIV3.50.01.05
V3.50.01.08
V3.50.01.10
V3.50.01.15
V3.50.02.00
V3.50.02.02
V3.50.03.02

.

Order

To create a fix firmware you need to send the data of your printer:

1. Exact printer model
2. Firmware version
3. Machine Serial Number
4. CRUM Number (Toner chip)

To check printer reports (in order not to make a mistake in the data) we recommend use the free program PC_INFO_TO0L, it has the ability to save reports, you can send this report to us

Instruction (Manual) for program firmware

1. Connect printer to computer
2. Enter printer into DOWNLOAD MODE (forced mode)
3. Drag and drop file First_WC3025BI_V3.50.01.xx.hd on usbprns2.exe
4. Wait for the printer to done programming (2-4 minutes) and then it will reboot itself.
5. After rebooting the printer, wait until it is ready and you need go to printer service menu [Menu◄] [►Back] [▲] [▼] [OK] [Stop] [Menu◄]  and turn on update mode [Diagnostics > Data Setup > Firmware Upgrate > On > OK]
6. Drag and drop file FIX_NU_xxxxxxxxxx_Second_WC3025BI_V3.50.01.xx.hd on usbprns2.exe
7. Wait for the printer to done programming (2-4 minutes) and then it will reboot itself.
8. After the firmware, you need to glue tape of toner chip and not allow other chips
9. Done, the firmware is finished.


Categories

Top sellers

Specials

No specials at this time.