Xerox Phaser 3052, 3260 fix firmware [chipless / sin chip]

Model	Version firmware
Phaser 3052NI Phaser 3260DNI	V3.50.01.05 V3.50.01.08 V3.50.01.11 V3.50.01.13 V3.50.01.16 V3.50.02.01 V3.50.02.02 V3.50.02.05

.

Order

To create a chipless firmware you need to send the data of your printer: data ID printer

To create a fix firmware you need to send the data of your printer:

1. Exact printer model
2. Firmware version
3. Machine Serial Number
4. CRUM Number (Toner chip)

To check printer reports (in order not to make a mistake in the data) we recommend use the free program Printer Reports by ORPYS, it has the ability to save reports, you can send this report to us

Instruction (Manual) for program firmware

1. Connect printer to computer
2. Enter printer into Download Mode [forced mode]
    - On the printer turned off,
    - Press and hold buttons [WPS] after [Power]
    - Release the buttons.
3. Extract the archive with the firmware and run the file download_1.bat or drag and drop the file Phaser3260_V3.50.xx.xx.hd on usbprns2.exe.
    - Wait for the printer to done programming (1-2 minutes) and then it will reboot itself
4. After rebooting the printer, wait until it is ready and run the file download_2.bat or drag and drop the file P_NU_ХХХХХХХХХХ_Phaser3260_V3.50.xx.xx.hd on usbprns2.exe.
    - Wait for the printer to done programming (1-2 minutes) and then it will reboot itself
    - After the firmware, you need to glue tape 2 chips (toner and drum) and not allow other chips.
5. Done, the firmware is finished.

P/S: After firmware, we recommend disconnecting the CRUM connectors from the Mainboard

Instruction (Manual) for program original firmware

Enter Download Mode [forced mode]