Epson EcoTank ET-2720, ET-2720 Reset Waste Ink Pad Counter

(instruction)

1 Extract the archive with program

2 Run program AdjProg Rev3.exe

2 Push the button Select

3 Select printer model

ET-2720

ET-2726

4 The printer port can be left Auto selection, but it is advisable to choose which one it is connected to and click the OK button

5 Push the button Particular adjustment mode

6 Select Waste ink pad counter и push the button OK

7 Put checkmarks in front of Main Pad Counter and Platen pad counter  and press the Check button to see how many meters are filled  (point 7 is not necessary to perform)

8 Put checkmarks in front of Main Pad Counter and Platen pad counter  and press the Initialization button to reset the waste ink pad counters , after the message pops up When the OK button is clicked, counter will be initialized , need click the OK button

Next, the program will show need to restart the printer. Please turn off the printer, then you restart printer - you can close the program

The counters are reseted, then we recommend to remove and wash the absorbent diaper diapers or replace it/strong>

Program (Resetter) for reset waste ink pad counter of printers Epson ET-2720, ET-2720 in this page